Peerless by Tymphany XXLS-P835016
subwoofer · EBP 69 → suits either box · nominal (full) — Tymphany Peerless XXLS-P835016 driver specification sheet (manufacturer)
Thiele/Small parameters
| Fs (resonance) | 26.07 Hz |
| Qts | 0.37 |
| Qes / Qms | 0.38 / 11.27 |
| Vas | 65.1 L |
| Re / nominal Z | 2.46 Ω / 4 Ω |
| Xmax | 12.3 mm |
| Sensitivity | 86.7 dB (1 W/1 m, calc); 88.98 dB (2.83 V/1 m, mfr) |
| Power handling | 100 W |
Published (nominal) values, params full — verify by measurement (DATS/REW) before building. datasheet
Recommended enclosures
| Sealed (Qtc 0.707) — Vb | 24.6 L |
| Sealed — Fc / F3 | 49.8 / 49.8 Hz |
| Ported (suggested) — Vb | 48.9 L |
| Ported — Fb / F3 | 28.5 / 28.9 Hz |
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Peerless by Tymphany XXLS-P835016 is a 10″ subwoofer with a free-air resonance of 26.07 Hz and a total Q (Qts) of 0.37. Its efficiency-bandwidth product (EBP) of 69 points toward either alignment. In a 24.6 L sealed box it reaches an F3 of 49.8 Hz (Qtc 0.707); a suggested 48.9 L box tuned to 28.5 Hz extends to about 28.9 Hz. See the sealed vs ported guide for how to choose.
NOMINAL/manufacturer (Tymphany spec sheet). Fs 26.07 Hz; Zmin 3.35 ohm (nominal 4); Vas 65.09 L; Sd 356.3 cm2; BL 10.36 Tm; Mms 102.1 g; Xmax 12.3 mm; sensitivity 88.98 dB@2.83V (85.2 dB@1W); 100 W; 51 mm VC. Aluminium cone (sub use; cone breakup well above sub passband - no datasheet breakup peak given).
Recommended partners
modeled estimateThe tweeters below pair well with the Peerless by Tymphany XXLS-P835016 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 76/100
Suggested crossover 825 Hz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS28F-4Moderate match· 74/100
Suggested crossover 818 Hz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDC-C000-4Moderate match· 72/100
Suggested crossover 900 Hz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany D27TG35-06Moderate match· 51/100
Suggested crossover 1.37 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio ND25FA-4Incompatible· 0/100
Crossover not modelable yet — tweeter needs published Thiele/Small data.
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.