Dayton Audio RS52AN-8
midrange · nominal (name-only) — Dayton Audio Reference series
Thiele/Small parameters
| Fs (resonance) | — |
| Qts | — |
| Qes / Qms | — / — |
| Vas | — |
| Re / nominal Z | — / 8 Ω |
| Xmax | — |
| Sensitivity | — |
Published (nominal) values, params name-only — verify by measurement (DATS/REW) before building.
Recommended enclosures
This is a midrange; Thiele/Small box parameters are not used for enclosure design.
Affiliate disclosure: some links are affiliate links and we may earn a commission on qualifying purchases at no extra cost to you. Prices are estimates at the time of writing; verify on the retailer's site.
About this driver
The Dayton Audio RS52AN-8 is a 2″ midrange. See the sealed vs ported guide for how to choose.
2in dome midrange (Peerless-made).
Recommended partners
modeled estimateThe tweeters below pair well with the Dayton Audio RS52AN-8 in a two-way design — each grade is a modeled estimate of the crossover match, with a suggested crossover point. Open any pair in the guided builder to design the crossover and total the parts.
- Seas 27TBFC/G H1212-06Good match· 84/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair → - SB Acoustics SB29RDC-C000-4Good match· 84/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio ND25FA-4Good match· 84/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Peerless by Tymphany D27TG35-06Good match· 84/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair → - Dayton Audio RS28F-4Good match· 84/100
Suggested crossover 4.05 kHz (4th-order, Linkwitz-Riley)
Build this pair →
Modeled estimate from T/S + geometry — no measurements. The verdict is robust; it improves with measured FRD/ZMA data.